Description of High Efficient Automatic Functioning Pressure Spray Dryer
It is most suitable for producing solid powder or particle products
from liquid materials, such as: solution, emulsion, suspension and
pumpable paste states, For this reason, when the particle size and
distribution of the final products, residual water contents, mass
density and the particle shape must meet the precise standard,
spray drying is one of the most desired technologies.
Principle of High Efficient Automatic Functioning Pressure Spray Dryer
After been filtered and heated the air enters into the air
distributor on the top of the dryer. The hot air enters into the
drying room in the spiral form and uniformly. Passing through the
high-speed centrifugal sprayer on the top of the tower, the
material liquid will rotate and be sprayed into the extremely fine
mist liquid beads. Through the very short time of contacting the
heat air, the materials can be dried into the final products. The
final products will be discharged continuously from the bottom of
the drying tower and from the cyclones. The waste gas will be
discharged from blower.
Feature of High Efficient Automatic Functioning Pressure Spray Dryer
The drying speed is high when the material liquid is atomized, the
surface area of the material will increase greatly. In the hot-air
flow,95%-98% of water can be evaporated at a moment. The time of
completing the drying is only several seconds. This is especially
suitable for drying the heat sensitive materials.
Its final products own the good uniformity, flow ability &
solubility. And the final products are high in purity and good in
quality.
The production procedures are simple and the operation and control
are easy. The liquid with moisture contents of 40-60%(for special
materials, the contents might be up to 90%).can be dried into the
powder or particle products once a time. After the drying process,
there is no need for smashing and sorting, so as to reduce the
operation procedures in the production and to enhance the product
purity. The product particle diameters, looseness and water
contents can be adjusted through changing the operation condition
within a certain range. It is very convenient to carry out control
and management.
Technical Parameters of High Efficient Automatic Functioning Pressure Spray Dryer
Picture of High Efficient Automatic Functioning Pressure Spray Dryer
After Sell Service
Service before sell:
----Provide relative technical data for help equipment selection
----Running pilot test
----Offering advice for equipment selection, material analysis
----Provide flow chart, basic drawing
----Provide technical design
Service in sell:
----Provide factory layout according to contract
----Manufacturing ordered equipment according to the related
standard
---- A presentation report of manufacturing situation will be
offered every 15days
---- Tracking and supervising in whole manufacturing and
transporting period according to the contract requirement
---- Photo of wooden case will be offered, wooden case with
standard shipping marks.
---- Photo of freight loading will be offered.
---- A record of detailed delivery list will be offered
---- A record of detailed freight loading list will be offered
---- All of wooden case will be marked serial number, all of
attachments will be marked serial number, convenient for client's
clearing
Service after sell:
----Send service engineer for help instruct installation.
----Send service engineer for running test at site and training the
operator
----Help client for maintenance and repair
----Provide one year spare part
----Quality warranty for two years after sell
Packing & Delivery
